top of page
painting_transparent_bg3-2880w.png

Unit Cladding Spraying

Rectangle-1-1.jpg

Key Features

  • Colour match to the windows

  • The roof can be sprayed to match too

  • Gutters & downpipes sprayed

  • Kolorbond paint with UV protection

  • Choose any colour from all standard colour charts (RAL, BS) and most decorative colour ranges

  • Matt, satin & gloss finishes available

  • One-day turnaround

  • 10-year guarantee

  • Save up to 80%

Our spraying process

Cleaning & Degreasing

We clean the substrate using Vinylkleen and Scotchbrites which lightly abrade the surface.

This stage removes all water-soluble contaminants and most oils.

Next we thoroughly clean the profile surface again using Windowprep and a clean white cloth.

Stage 2

Spraying

Next, we use specialist materials to remove any dust or swarf remaining on the surface of the profile.

We then spray the profile with a dust coat and check for any contamination before proceeding to spray a full coat.

We allow this to flash off then inspect for inclusions. If any are identified, we remove them with sand paper and apply a further coat.

Stage 4

Unmasking & Re-sealing

Finally, we unmask all surfaces and re-seal where silicone has been removed from the profile with a new, colour-coded silicone.

Stage 1

Masking

This is the most time-consuming part of the job.

During this stage we cover all surrounding surfaces of the profile that don't require painting to protect them from any overspray.

Stage 3

Quality Check

Once spraying is complete, before we unmask the profile, an inspection across all painted surfaces is carried out.

This is to ensure we have a flawless finish and no touch ups are needed.

Stage 5

bottom of page